Infusion Pump

Automatic infusion pump KVO (Keep Vein Open) Audible and visible alarm Self-check after startup Memory function

Functions: 

Automatic infusionKVO (Keep Vein Open)It will give audible and visible alarm and then switch to KVO mode after finish infusing the preset volumeAudible and visible alarmThe pump has OCCLUSION, AIR IN LINE, DOOR OPEN, FINISH, LOW BATT, INTERRUPTION, ABNORMAL and DELAY OPERATION alarm functionsAC/DCWhen the pump stops, purge function is ended to purge air out of line. Double click bolus button to purge. Contrarily, it infuses fastFlow rate settingSet the flow rate between: Drop/min, ml/h and time infusion volumeSelf-check after startupWhen power on, the pump executes a self-check. LCD display and all lamps will be lighten if it works normally. The corresponding lamp will be off if any part doesn’t workAccumulated volume display and clearMemory functionMemory can keep the parameters which you set up last time over 8 yearsFlow rate calibrationIn order to make infusion accurate, calibrate the infusion set according to actual situation

Specifications: 

Flow Rate	1ml/h~1300ml/hMore than 1000ml/h, 1ml/h stepLess than 1000ml/h, 0.1ml/h step
Standard IV SET	±5%
Preset infusion volume	1ml~9999mlMore than 1000ml, 1ml stepLess than 1000ml, 0.1ml step
Occlusion sensitivity	Optional choose from higher to lower
KVO rate	1~5ml/h (adjustable)
Power supply	110~220+10%, 50~60Hz+1Hz
Power consumption	Less than 20VA
Battery Life	More than 3 hours continuously at 30ml/h with fully charged battery
Work Condition	Circumstance Temperature: 10 ~40°C infusion precision will decrease when temperature ≤18°C Relative Humidity: 30~93% Atmospheric Pressure: 86~106KPa
Applicable scope	Fit for mainline, small volume infusion, quick infusion

Infusion Pump